MasteringBox Logo
5 Tips for Recording a Live Band in Studio

5 Tips for Recording a Live Band in Studio

- 0 commentaire

For several decades now, the recording process has typically been piece-meal. One instrument is tracked by itself, then another, then another, until all the parts coalesce into what sounds like a full band playing simultaneously. Of course, there’s good reason for this broken-up process. For one thing, it makes fixing mistakes a lot easier. Rather than re-record the entire song with multiple players, just re-record that specific instrument and part. Also, not every band member is always available to record at the same time. With multi-track recording, the guitarist can lay her stuff down one day while the vocalist belts out his melody two days later. Convention and convenience aside, however, there’s a unique quality to recording a live band, both on stage and in the studio.

So if you want to break into recording a live band in your studio, here are five useful tips to get you started.

1. Know the band, know the song(s)

As with any recording, it helps to know the music beforehand. If the band has good recordings of the songs already, really get to know them. Listen several times until they’re embedded in your head. Focus on where the instruments sit, what choices the vocalist makes, where the melodies shine through, etc. The more you know about the material, the better. If the band doesn’t have a pre-existing recording of what they plan on playing, you have to start asking questions. It’s also a good idea to have the band rehearse the songs in front of you a few times to give you an even better idea.

2. Staging the room for recording a live band

Knowing the music matters, but so does knowing where the players should stand or sit, and how far apart or close they should be. You also have to consider what kinds of mics to use, and how many you’ll need. The size of the room will make a big difference here. Smaller spaces will require more precise microphone placement and directionality. Additionally, the polar patterns of the mics will make a big difference when trying to hone in on specific sounds while rejecting others. And, of course, room mics will pick up the entire live band and really help create that authentic live sound when mixed in properly. Consider an NTR ribbon mic pair for these purposes to capture a fuller sound.

3. Testing, testing, 1…2…3

The main difference between recording in sections and recording a live band lies in the planning. Sure, plenty of planning has to go into recording multiple tracks, but there’s more room for error and improvisation, more time to address issues, and more space to keep song elements and recording processes separate from another. When recording a live band, on the other hand, the pieces need to be in place all at once.

That being said, you still have multiple attempts at your disposal to get it right. Running through some test recordings is crucial. First, have each player record a part of the song by themselves, and see which mics pick up the sound. If the drums are bleeding too much into the guitar track, or the low-end of the bass isn’t being fully captured, now you can adjust accordingly. Once each instrument is fine-tuned, start running through test recordings with the full band. It might take a handful of test runs to solidify your settings, but it’s worth the effort.

4. Keep everything in sync and in tune

recording a live band intonation

As the engineer and producer, the performance aspect isn’t really in your hands. It should be a given at this point that the live band you’re recording can play well live. But even the best live band might need a little oversight and aid. To begin with, every instrument needs to be in tune and in an environment that will maintain its intonation. With multi-track recording, tracks are separate enough to be tweaked in small ways in the mixing process. A slightly flat guitar note can be shifted in pitch to match the rest of the song. This process can’t be so easily applied to live recordings, however, since sounds bleed into one another in each track. If every player is in tune from the beginning and stays that way, this shouldn’t be an issue, so long as they’re playing correctly.

Every player needs to be right on tempo with each other as well. Some live bands might be so in sync they choose to ditch the metronome and wing it. But most will want the reassurance of a click track, and the recording will be tighter for it. Make sure each player (especially the drummer) can fully hear the click track and play with it on time.

5. Direct inputs are your friend

When we think “live band recording” we don’t always think about D.I. tracks. Still, getting a direct signal from, say, an electric guitar, in addition to mic’ing it, can be a smart play in the mixing process. You might not use the D.I. track, but it might come in handy. If you blend the mic’ed guitar with the direct signal, you can get the best of both worlds: a raw, live guitar sound with minor bleeding and room sound with a crisp, direct recording that captures the details. This can be done for other instruments as well, so it’s good to D.I. as many as possible just to have in your mixing arsenal.

Conclusion

Since live band recordings are no longer necessary, their current function is more of an aesthetic one. Some bands choose to have live recordings to fit their niche and achieve a certain authentic and vintage sound quality. Other bands utilize live recordings as a marketing tool. Companies like Audiotree and Tiny Desk Concerts are two popular outlets bands use to promote their music by being recorded live with the addition of video. These live recordings aren’t used as their major releases, but they serve as ways to promote your music and provide bonus content to said material. With so many musicians seeking this type of content for their own purposes, knowing how to record live bands is a great skill to have.

À propos de l'auteur

Ethan Keeley

Ethan Keeley

Rédacteur, chanteur, musicien et monteur audio

Ethan Keeley est un musicien, un doubleur et un écrivain de Rochester, dans l'État de New York. Lorsqu'il n'est pas en tournée avec son groupe Unwill, il travaille sur de nouvelles chansons et histoires.

Laisse un commentaire

Connecte-toi pour commenter.

Articles connexes

MasteringBOX © 2024